RPC SERIES OWNER’S MANUAL
INTRODUCTION TO THE RPC SERIES
________________________________________________________________________________
1
INTRODUCTION TO THE REMOTE
POWER CONTROL SWITCH (RPC)
The BayTech RPC-Series is a full-featured AC power management
solution that provides an easy way to control power of remote equipment.
From your office or from anywhere, the RPC will TURN ON, TURN
OFF, OR REBOOT remote equipment.
There are six different RPC models. Four models operate at 115 VAC, 15
Amp. Two models operate at 230 VAC, 10 Amp.
115 VAC, 50/60 Hz, 15 Amp
RPC-2:
Six receptacles and an EIA-232 connection.
RPC-2 MD01:
Six receptacles, EIA-232 connection, and a
2400 bps Modem.
RPC-2 RDR:
Six receptacles, EIA-232 connection, and
Ring Detect Reset.
RPC-3:
Eight receptacles, Ethernet and EIA-232
connections.
RPC-5:
Four receptacles (15 amps per receptacle),
Ethernet and
EIA-232 connections.
230 VAC, 50/60 Hz, 10 Amp
RPC-2A:
Six receptacles and an EIA-232 connection.
RPC-3A:
Eight receptacles, Ethernet, and EIA-232
connections.
To Next Page
Loading...
Need help?
General