13
1
Introduction
The BD FACSCanto system uses a fixed-optics design and advanced digital
electronics to support multicolor analysis of up to six fluorescent markers and
two scatter parameters per assay.
The cytometer does not require special facilities—it plugs into a standard wall
outlet, uses air-cooled lasers, and provides its own air pressure and vacuum for
the fluidics and waste. You can prepare samples on the BD FACSâ„¢ Sample Prep
Assistant II and import the sample prep worklist.
For further automation, use BD FACSCanto clinical software and the BD FACS
Loader for sample acquisition. Alternatively, use BD FACSDiva software for
more flexibility in acquisition and analysis.
See the following for more information:
• Intended Use on page 14
• System Components on page 14
• System Requirements on page 31
To Next Page
Loading...
