Chapter 2: BD FACS Loader Option 39
Changing Operational Modes
Performing a few simple steps allows you to change from automatic loading to
manual loading. See the following sections for instructions.
• Changing to Manual Loading (on this page)
• Changing to Automatic Loading on page 41
Changing to Manual Loading
To change to manual mode, follow these steps.
Materials
personal protective equipment
Procedure
1 Remove the Loader cover.
2 Pull out the drawer.
3 Remove any carousel in the Loader.
Handle all biological specimens and materials as if capable of transmitting
infection. Dispose of waste using proper precautions and in accordance
with local regulations. Wear suitable protective clothing, eyewear, and
gloves.
To Next Page
Loading...
