Belanger CUBE - Setup; Application Setup; Setup; Advanced Configuration

CUBE® CONTROLLER
1MANUL964 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 5-3
Chapter 5 Operator Interface / Programming
Setup
Setup / Application Setup
X2 PRO
SCREEN KEY
• Column FILL is measured in
seconds
• FILL values may be changed
in increments of tenths of a
second
FILL: The FILL time delays Carriage motion while application is filling. Typically, time is long enough to pressurize
nozzles and ensure chemical is dispensing out of the nozzles.
Setup / Advanced Configuration
See Chapter 6.