FULL SIDE WASHER
8 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL854
Introduction
Before You Get Started
Tools needed for installation:
Hammer drill with 5/8” bit
Tape measure (25 feet or greater)
Full Side Washer boom assemblies
Lower Side Wheel wash material
Hitch Hiker wash material
Air Panel (if purchased as a component)
Note: Uncrate and inspect the shipment for damage, and verify that all pieces are there. If there
is any damaged equipment, file a claim with the trucking company immediately. Receiving
party is responsible for filing a claim with the trucking company. Notify your local
distributor or Belanger, Inc. immediately If a shipment is determined damaged or
incomplete.