Belanger Full Side Washer - Specifications; Requirements; Output

FULL SIDE WASHER
1MANUL854 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167 -5470 * Ph (248) 349-7010 * Fax (248) 380-9681 9
Specifications
Requirements
Physical
Tunnel space required
84”
Unit height
118"
Utility
Electrical
110, 208, 230, 460, 575
Hydraulic
4 GPM @ 900 PSI
Pneumatic
.3 CFM @ 90 PSI minimum 120 PSI maximum
Water
(2) 3/4” pipe @ 6 GPM @ 40 PSI
Output
Physical
Vehicle clearance, height
90”
Utility
Pneumatic
.3 CFM @ 90 PSI
DISCONNECT AND LOCKOUT ELECTRICAL POWER BEFORE SERVICING ANY
EQUIPMENT!
Always wear safety glasses when performing maintenance on any equipment
It is recommended that a licensed electrician is contracted to perform all electrical installations.
Note: YOUR HYDRAULIC SYSTEM MUST BE CAPABLE OF ADJUSTMENT TO 76 RPM
AT 900 PSI (62.1 BAR) WHILE LOADED AGAINST VEHICLE. PLEASE VERIFY
YOUR SYSTEMS CAPABILITY TO MEET THESE SETTING WHILE RUNNING A
VEHICLE PRIOR TO INSTALLING PIECE OF EQUIPMENT!
A compressed Air System should be set correctly to support 90 PSI necessary to operate the
equipment but should never be set to deliver more than 120 PSI air pressure to the Belanger
specified equipment.