Belanger Full Side Washer - Hubs, Side Wheels, and Cleaning Material

FULL SIDE WASHER
20 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 1MANUL854
Installation
Hubs, Side Wheels, and Cleaning Material
This section is intended to assist in assembling the hubs and installing the wash material.
Note: Do not install any wash material until all equipment has been installed, turned on, and
checked for hydraulic, pneumatic, and water leaks.
Tools Needed for Installation:
3/4” wrench
13/16” socket
(2) 9/16” wrenches
3/4” socket
1/2” impact wrench or ratchet
Ladder
Miscellaneous hand tools
Work gloves
Tape measure (25 feet or greater)
Safety glasses
5/32” Allen wrench
DISCONNECT AND LOCKOUT ELECTRICAL POWER BEFORE SERVICING ANY
EQUIPMENT!
CAUTION
Always wear safety glasses when performing maintenance on any equipment