Belanger Full Side Washer - Page 5

CURRENT REVISION LOG
1MANUL854 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681
Rev
Release
Date
Page
Description
16
10/09/20
3
Updated Belanger Limited Warranty
4
Changed Bi-floride to Bi-fluoride
26
Added Overview for Neo-Tex
™
fill diagram (per Change Request #35)
28-29
Changed the order of these pages and updated the Upper Neo-Tex
™
fill diagram (per Change Request #35)
42
Deleted unnecessary part number callouts
53
Added Neo-Tex
™
Wash Clips and Fill Pattern
54
Updated the Neo-Tex
™
fill diagram to include the part numbers for the Black Neo-Tex™, changed 24 Piece
Set to 48 Piece Set on the lower hub part number callouts (per Change Request #35)
17
10/09/20
Front Cover
Updated Cover to the new layout
Cover Page
Updated Copyright date from 2014 to 2020
Manual
Updated Belanger® logo
Back Cover
Updated Back Cover to the new layout
40
Changed Gearbox Assembly numbers from 1GEABX-AS986 to 112286 and 1GEABX-AS988 to 112288 (per
ECN #5131)
18
06/23/22
3
Changed Belanger Limited Warranty on Parts from 30 days to 90 days
11
Added page Installation: Identify Conveyor
Added Note that 13” conveyor is shown in the images in this manual (per Project #32-523)
12
Updated dimension to driver side FSW 13” Conveyor: 56” and 14-1/2” Conveyor: 57-1/2”
Added to note under image: (13” Conveyor: 56”/14-1/2” Conveyor: 57-1/2”) (per Project #32-523)
13
Updated dimension to driver side FSW 13” Conveyor: 56” and 14-1/2” Conveyor: 57-1/2”
Added to note under image: (13” Conveyor: 56”/14-1/2” Conveyor: 57-1/2”) (per Project #32-523)
Removed note for dimension 170” from under the image
31
Added Step 6 to Initial Startup: Connect water lines to the Water Manifold Assemblies attached to the leg of
each FSW assembly
35
Update Step 8 to state: remove the eight (8) (older equipment has four (4)) flat head fasteners
Changed image to show the current torque plate with eight holes and fasteners
36
Updated Step 7 to state torque all eight (8) fasteners (four (4) on older equipment) to 25 ft-lbs.
38
Changed bearing 791 to 1BERNG848 in 2 places
Changed 1FSTNR-HH810 to 1FSTNR-HH811 in 2 places
39
Added Hydraulic Motor Assembly 100109 and Torque Channel Assembly: 101229
Changed bearing 1609 to 1BERNG848
Changed bearing 791 to 1BERNG848
Changed cover 17 to 1PLSTC-EX082 (per Change Request #95)
Removed 1FSTNR-SM500 (4) (per Change Request #95)
40
Changed bearing 791 to 1BERNG848 in 2 places
Changed 1FSTNR-HH810 to 1FSTNR-HH811 in 2 places
41
Added 112297: 380/400-415 Volts to Motor/Gearbox callout (per Project #10038)
Updated exploded views of Head Assembly to show current Torque Plate 108661 with 8-holes
Added enlarged exploded view of Torque Plate Assembly108661 to show 1GRMIT222 (2)
Corrected 1FSTNR-FH025 to 1FSTNR-FH075 and changed quantity from 4 to 8
Changed 1FSTNR-SM500 (2) to 1FSTNR-PH040 (2)
Added 1GEABX-KT250 and 1ELECT-FS855 (4) to the exploded view
Updated enlarged views in the chart – added 1FSTNR-PH040 & 1ELECT-FS855
42
Updated exploded view of Head Assembly to show Filler Strip, Torque Plate, and fasteners
Added 1WASHR-LC581 (4) in 2 places
Changed cover 17 to 1PLSTC-EX082 (per Change Request #95)
Removed 1FSTNR-SM500 (4) (per Change Request #95)
43
Added Arm & Stand Assembly (Hydraulic) part numbers for DS & PS
Adde Lagbolt and Leveling Bolt part numbers and quantities
44
Added FSW Arm Assembly and FSW Stand Assembly (Electric) part numbers for DS & PS
Updated the Full Side Washer Air Panel (Electric) assembly 108489
Added Lagbolt & Leveling Bolt part numbers and quantities
45
Added page Leg Water Manifold Assembly
46
Changed 1FSTNR-HH045 to 1FSTNR-HH056
Changed (2 per Spider Half) to (8 per Hub Assembly) for the hub fasteners in 3 places
Added a quantity of (2) to1141 and 101141
Changed 1FSTNR-HH162 (1 per Spider Half) to 1FSTNR-HH162 (2)
Changed 1WASHR-LC270 (1 per Spider Half) to 1WASHR-LC270 (2)
Changed (per Wheel) to (per Hub) in 2 places
Added note: Upper Hub 106782 is used on the driver & passenger side FSW assemblies