13
Note that the battery of a newly purchased camera is not charged. Perform the steps below
to load the battery into the camera and charge it.
• Use only the provided batteries or type of battery and charger that came with your
camera. Using other types of battery or charger may damage the equipment and invalidate
the warranty.
1. Open the battery cover.
Slide the battery cover slider towards
OPEN and then open it as indicated by the
arrows in the illustration.
2. Load the battery.
Insert the battery into the
compartment with the terminal
facing inside the camera with
correct orientation as shown.
Press the battery in until the
stopper secures it in place.
3. Close the battery cover.
Close the battery cover and then shift the
slider towards LOCK.
First, charge the battery prior to use.
To load the battery
To Next Page
Loading...
Need help?
General
