24
Use the following procedure to view snapshots on the camera’s monitor screen.
1. Press [ ] (PLAY) to enter the PLAY
mode.
• This will display one of the snapshots
currently stored in memory.
• Information about the displayed snapshot
also is included.
• You also can clear the information to view
only the snapshot.
• You can zoom in on the image by sliding
the zoom controller towards . If you are recording a snapshot that is very
important to you, it is recommended that you zoom the image and check its details
after recording it.
2. Use [ ] and [ ] to scroll between images.
• Holding down either button scrolls at high speed.
• Half-pressing the shutter button while in the PLAY mode or while a menu screen is
displayed will switch directly to the REC mode.
Viewing Snapshots
To Next Page
Loading...
Need help?
General
