[ ] (REC) [SET] MENU Quality Tab ISO
ISO sensitivity is a measure of sensitivity to light.
• “Auto” ISO sensitivity always is applied for movies, regardless of the current ISO
sensitivity setting.
• Higher ISO sensitivity values tend to result in digital noise in images.
[ ] (REC) [SET] MENU Quality Tab D-Lighting
You can use this setting to optimize the balance between bright areas and dark areas when
shooting images.
[ ] (REC) [SET] MENU Quality Tab Color Mode
Settings: Off, B/W, Sepia, Red, Green, Blue, Yellow, Pink, and Purple
Specifying ISO Sensitivity (ISO)
Auto Adjusts sensitivity automatically according to conditions.
ISO 64
Lower sensitivity
Higher sensitivity
Slow shutter speed
Fast shutter speed (Set for
shooting in dimly lit areas.)
Less noise
Some coarseness
(increased digital noise)
ISO 100
ISO 200
ISO 400
ISO 800
ISO 1600
Optimizing Image Brightness (D-Lighting)
On
Performs brightness correction. When this option is selected, it takes
longer for the image to be stored after the shutter button is pressed.
Off Does not perform brightness correction.
Using Built-in Color Filters (Color Mode)
Downloaded From camera-usermanual.com BenQ Manuals
To Next Page
Loading...
Need help?
General
