40
Voice REC lets you record audio only, without a snapshot or movie.
1. In the REC mode, press [SET].
2. Use [ ] and [ ] to select the bottom Control Panel option (SCN) and then
press [SET].
3. Use [ ], [ ], [ ], and [ ] to select the “Voice REC” scene and then press
[SET].
This causes to appear on the monitor screen.
4. Press the shutter button to start recording.
• The back lamp flashes green while recording is in
progress.
• Pressing [SET] during recording will insert a marker
into the recording. During playback, you will be able to
jump to the markers in the recording.
5. Press the shutter button again to stop audio
recording.
• To create another audio recording file, repeat steps 4
and 5.
• To turn off Voice REC, press [SET], use [ ] and [ ] to select the bottom Control
Panel option (SCN), and then select (Auto).
• You can use [ ] (DISP) during audio recording to toggle the monitor screen on and off.
• When monitor screen contents are turned off, selecting the “Voice REC” scene will cause
the monitor screen to turn off immediately.
Recording Audio Only (Voice REC)
To Next Page
Loading...
Need help?
General
