[SET] MENU Set Up Tab Date Stamp
You can configure the camera to stamp the recording date only, or date and time in the
lower right corner of each snapshot.
• Once date and time information is stamped into a snapshot, it cannot be edited or
deleted.
Example: July, 10, 2012, 1:25 p.m.
• Even if you do not stamp the date and/or time with Date Stamp, you can do so later using
the DPOF function or some printing application.
• Digital zoom is disabled while time stamping is turned on.
• Time stamping is disabled when certain Scene Mode scenes are being used.
[SET] MENU Set Up Tab Adjust
When the date and time settings are what you want, press [SET] to apply them.
• You can specify a date from 2001 to 2049.
• Be sure to select your Home City before setting the time and date. If you set the time and
date while the wrong city is selected for your Home City, the times and dates of all of the
World Time cities will be wrong.
Time Stamping Snapshots (Date Stamp)
Date 2012/7/10
Date&Time 2012/7/10 1:25pm
Off No stamping of date and/or time
Setting the Camera’s Clock (Adjust)
[ ] [ ] Change the setting at the cursor location
[ ] [ ] Move the cursor between settings
[ ] (Movie) Toggles between 12-hour and 24-hour format
Downloaded From camera-usermanual.com BenQ Manuals
To Next Page
Loading...
Need help?
General
