[ ] (REC) [SET] MENU Quality Tab Quality (Snapshot)
• The “Fine” setting helps to bring out details when shooting a finely detailed image of
nature that includes dense tree branches or leaves, or an image of a complex pattern.
[ ] (REC) [SET] MENU Quality Tab EV Compensation
You can manually adjust an image’s exposure value (EV value) before shooting it.
• EV Compensation Range: –2.0 EV to +2.0 EV
• Unit: 1/3 EV
1. Use [ ] and [ ] to adjust the exposure compensation value.
To cancel exposure compensation, change the EV value to 0.0.
2. Press [SET].
This applies the exposure compensation value. The exposure compensation value you
set remains in effect until you change it or turn off the camera (which causes it to revert
to “0.0”).
• When shooting under very dark or very bright conditions, you may not be able to obtain
satisfactory results even after performing exposure compensation.
Image Quality Settings (Quality)
Specifying Snapshot Image Quality (Quality (Snapshot))
Fine Gives image quality priority.
Normal Normal
Correcting Image Brightness (EV Compensation)
[]:
Increases the EV value. A higher EV value is
best for light-colored subjects and backlit
subjects.
[]:
Decreases the EV value. A lower EV value
is best for dark-color subjects and for
shooting outdoors on a clear day.
Downloaded From camera-usermanual.com BenQ Manuals
To Next Page
Loading...
Need help?
General
