[SET] MENU Set Up Tab LCD Save
This feature turns off the monitor screen whenever no camera operation is performed for a
preset amount of time. Press any button to turn the monitor screen back on.
Trigger Time Settings: 30 sec, 1 min, 2 min, Off (LCD Save is disabled while “Off” is
selected.)
• LCD Save is disabled under any of the following conditions.
– In the PLAY mode
– While the camera is connected to a computer or other device
– During a slideshow
– During “ Tracking”
– During Voice REC playback or recording
– During movie recording and playback
• When both LCD Save and Power Saving are turned on, Power Saving takes priority.
[SET] MENU Set Up Tab Power Saving
Power Saving turns off the camera whenever no camera operation is performed for a preset
amount of time.
Trigger Time Settings: 1 min, 2 min, 5 min (The trigger time is always 5 minutes in the PLAY
mode.)
• Power Saving is disabled under any of the following conditions.
– While the camera is connected to a computer or other device
– During a slideshow
– During “ Tracking”
– During Voice REC playback or recording
– During movie recording and playback
Configuring Sleep State Settings (LCD Save)
Configuring Auto Power Settings (Power Saving)
Downloaded From camera-usermanual.com BenQ Manuals
To Next Page
Loading...
Need help?
General
