[SET] MENU Set Up Tab Format
If a memory card is loaded in the camera, this operation will format the memory card. It will
format built-in memory if no memory card is loaded.
• The format operation will delete all contents on the memory card or in built-in memory. It
cannot be undone. Make sure you do not need any data currently on the card or in built-
in memory before you format it.
• Formatting built-in memory will delete the following data.
– Protected images
– Startup screen
• Formatting a memory card will delete the following data.
– Protected images
• Formatting will cause all images to be deleted, even if file deletion is disabled (“On”
selected for “ Disable”) for some images.
• Make sure the camera’s battery is sufficiently charged before starting a formatting
operation. Formatting may not be performed correctly and the camera may stop
operating normally if the camera powers down while formatting is in progress.
• Never open the battery cover while formatting is in progress. Doing so can cause the
camera to stop operating normally.
[SET] MENU Set Up Tab Reset
The settings below are not reset.
World Time settings, clock settings, date format, screen language, video output
Formatting Built-in Memory or a Memory Card (Format)
Resetting the Camera to Factory Defaults (Reset)
Downloaded From camera-usermanual.com BenQ Manuals
To Next Page
Loading...
Need help?
General
