68
Other Settings (Set Up)
This section explains menu items that you can use to configure settings and perform other
operations in both the REC mode and PLAY mode.
[SET] MENU Set Up Tab Sounds
• Setting a volume level of 0 mutes output.
Configuring Camera Sound Settings (Sounds)
Startup Sound 1 / Sound 2 / Sound 3 / Off
Half Shutter
On / Off
Shutter
Beep
Beep
Specifies the sound volume. This setting is also used as the audio
level during video output.
Playback
Specifies the volume of movie and Audio Snapshot audio output.
This volume setting is not used during video output (from the
USB/AV port).
Downloaded From camera-usermanual.com BenQ Manuals
To Next Page
Loading...
