[SET] MENU Set Up Tab World Time
You can use the World Time screen to view the current time in a zone that is different from
your Home City when you go on a trip, etc. World Time displays the current time in 162
cities in 32 time zones around the globe.
1. Use [ ] and [ ] to select “Destination” and then press [ ].
• To change the geographic area and city for the time where you normally use the
camera, select “Home”.
2. Use [ ] and [ ] to select “City” and then press [ ].
• To change the “Destination” setting to summer time, use [ ] and [ ] to select
“DST” and then select “On”. Summer time is used in some geographical areas to
advance the current time setting by one hour during the summer months.
3. Use [ ], [ ], [ ], and [ ] to select the geographic area you want and then
press [SET].
4. Use [ ] and [ ] to select the city you want and then press [SET].
5. Press [SET].
• Before configuring World Time settings, make sure that the Home City setting is the place
where you live or normally use the camera. If it isn’t, select “Home” on the screen in step
1 and configure the Home City, date, and time settings as required.
Configuring World Time Settings (World Time)
Downloaded From camera-usermanual.com BenQ Manuals
To Next Page
Loading...
Need help?
General
