[SET] MENU Set Up Tab REC/PLAY
• With “Power On/Off”, the camera turns off when you press [ ] (REC) in the REC mode
or [ ] (PLAY) in the PLAY mode.
• Change this setting to anything besides “Disable” before connecting to a TV for image
viewing.
[SET] MENU Set Up Tab Disable
The camera will not start the image delete operation when you press [ ] (Delete) while
“ Disable” is turned on.
You can protect against accidental deletion of images by selecting “On” for
“ Disable”.
• Performing a format operation will cause all images to be deleted, even if file deletion is
disabled (“On” selected for “ Disable”) for some images.
Configuring [ ] and [ ] Settings (REC/PLAY)
Power On Camera turns on whenever [ ] (REC) or [ ] (PLAY) is pressed.
Power On/Off
Camera turns on or off whenever [ ] (REC) or [ ] (PLAY) is
pressed.
Disable
Camera does not turn on or off whenever [ ] (REC) or [ ]
(PLAY) is pressed.
Disabling File Deletion ( Disable)
Downloaded From camera-usermanual.com BenQ Manuals
To Next Page
Loading...
