• Vibration and noise will occur due to lens operation. This does not indicate malfunction.
• Simple Mode Control Panel
In the Simple mode, the Control Panel provides you with access to four setting items: image
size, flash, self-timer, and Simple Mode. There is also a “MENU” option, which you can select
to display a menu screen for configuring image quality and Setup tab settings.
• In the Simple mode, the Quality tab can be used to configure the “Movie Quality” and “D-
Lighting” settings only.
• The settings of menu options that appear on the normal REC menu but not on the Simple
mode REC menu are automatically fixed at their optimum settings. These fixed settings do
not affect normal REC menu settings.
1. In the Simple mode, press [SET].
In the Simple mode, the characters that appear on the
setting screen are larger than they are in other modes.
2. Use [ ] and [ ] to select the setting you want
to change.
1 Image size
2Flash
3Self-timer
4Simple Mode
5 REC menu display
3. Use [ ] and [ ] to change the setting.
• An asterisk (*) indicates reset default settings.
• The following are explanations of the Simple Mode.
: Stays in Simple Mode.
: Exits Simple Mode to the normal REC mode.
Setting: Available Options:
Photo Size * / /
Flash (Auto)* / (On) / (Off)
Self-timer (Self-timer: 10 sec.) / *
Simple Mode / *
MENU Quality tab/Set Up tab
To Next Page
Loading...
Need help?
General
