78
The flash does
not fire or
recharge.
The camera flash is turned
off.
Set the flash to Auto Flash.
The light source is
sufficient.
--
Even though the
flash fired, the
image is dark.
The distance to the subject
is greater than the flash's
effective range.
Get closer to the subject and
shoot.
The image is
too bright or
too dark.
The exposure is excessive
or inadequate.
Reset exposure compensation.
I cannot format
a memory card.
The memory card is write-
protected.
Remove the write protection.
End of the memory card
life.
Insert a new memory card.
I cannot
download
images from the
camera to my
computer.
The free space on the hard
disk of your computer is
insufficient.
Ensure that the hard disk has
enough space for running
Windows and that the drive for
loading image files has free
space equal to or greater than
the memory card in the camera.
There is no power being
supplied to the camera.
Replace the battery.
Problem Cause Solution
Downloaded From camera-usermanual.com BenQ Manuals
To Next Page
Loading...
Need help?
General
