EU DECLARATION OF CONFORMITY
EU Declaration of Conformity
According to the EMC – Directive 89/336/EEC as Amended by 92/31/EEC and 93/68/EEC
Product Category: Motor Controller
Product Type: Reduced Voltage Solid State Motor Controller
Model Number:
Manufacturer's Name: Benshaw, Inc.
Manufacturer's Address: 1659 East Sutter Road
Glenshaw, PA 15116
United States of America
The before mentioned products comply with the following EU directives and Standards:
Safety: UL 508 Standard for Industrial Control Equipment covering devices for starting, stopping,
regulating, controlling, or protecting electric motors with ratings of 1500 volts or less.
Electromagnetic Compatibility: EN 50081-2 Emissions Radiated/Conducted
EN 55011/05.98+A1:1999
EN 50082-2 Immunity/Susceptibility which includes:
EN 61000-4-2 Electrostatic Discharge
EN 61000-4-3 Radiated RF
EN 61000-4-4 Electrical Fast Transient/Burst
EN 61000-4-6 Injected Currents
The products referenced above are for the use of control of the speed of AC motors. The use in residential and commercial premises
(Class B) requires an optional EMC series filter. Via internal mechanisms and Quality Control, it is verified that these products conform
to the requirements of the Directive and applicable standards.
Glenshaw, PA USA - 1 December 2006
Neil Abrams
Quality Control
Manager
198
APPENDIX D - EU DECLARATION OF CONFORMITY
RB2-1-S-027A-11C RB2-1-S-096A-13C RB2-1-S-240A-15C RB2-1-S-515A-17C
RB2-1-S-040A-11C RB2-1-S-125A-14C RB2-1-S-302A-15C RB2-1-S-590A-18C
RB2-1-S-052A-12C RB2-1-S-156A-14C RB2-1-S-361A-16C RB2-1-S-720A-19C
RB2-1-S-065A-12C
RB2-1-S-180A-14C RB2-1-S-414A-17C RB2-1-S-838A-20C
RB2-1-S-077A-13C RB2-1-S-180A-15C RB2-1-S-477A-17C
RC2-1-S-096A-13C RC2-1-S-240A-15C RC2-1-S-515A-17C
RC2-1-S-125A-14C RC2-1-S-302A-15C RC2-1-S-590A-18C
RC2-1-S-156A-14C RC2-1-S-361A-16C RC2-1-S-720A-19C
RC2-1-S-180A-14C RC2-1-S-414A-17C RC2-1-S-838A-20C
RC2-1-S-180A-15C RC2-1-S-477A-17C
To Next Page
Loading...
Need help?
General
