BENSHAW RSi S4 Series User Manual

107
Vin1Status I/O37
Cin1Status I/O38
I/O: Vin1 Status
37 +0.26%
I/O: Cin Status
38 0.46%
7 - PARAMETER DESCRIPTION
LCD Display
Range -100.0% to 100.0% (view only)
Description This parameter contains a value representing the measured input signal at the Vin terminal as a
percentage of the maximum input signal. For example, if Vin was congured to range from 0 to 10VDC
and the measured voltage was 2V, then this parameter would show 20% (2/10).
See also I/O 32 on page 104 and I/O 35 on page 105
LCD Display
Range 0% to 100.0% (view only)
Description This parameter contains a value representing the measured input signal at the Cin terminal as a percentage
of the maximum input signal. For example, if Cin was congured to range from 0 to 20mA and the
measured current was 15mA, then this parameter would show a value of 75% (15/20).
See also DRV 05, 07 on page 78.
Vin2Status I/O39
I/O: Vin2 Status
39 +0.24%
LCD Display
Range -100% to 100.0% (view only)
Description This parameter contains a value representing the measured input signal at the Vin 2 (input) terminal as a
percentage of the maximum input signal. For example, if Vin 2 was congured to range from 0 to 10VDC
and the measured voltage was 2V, then this parameter would show 20% (2/10).
See also DRV 05, 07 on page 78.

BENSHAW RSi S4 Series Specifications

General

Brand	BENSHAW
Model	RSi S4 Series
Category	DC Drives
Language	English