My bernette
18
2022-05 EN 50400685.00A.04
ULC
(Upper Looper Converter)
Upper Looper Cover
Upper Looper On/Off
CW
(Cutting Width)
Cutting Width
SL
(Stitch Length)
Stitch Length
DF
(Differential Feed)
Differential Feed
N/R Rolled Hem Selection Lever
mtc mtc micro thread control
FHS
(Free Hand System)
Knee Lifter (Free Hand System)
Foot Pressure
Air Threader
Air Threader Connector On/Off
Default Values
The default values of the machine are chosen so that the settings are suitable for most typical applications.
The default values are marked on the machine with a dot.
The actual values may differ from the stitch chart depending on the fabric, thread and stitch and may need
to be adjusted to the result of the sewing sample.
To Next Page
Loading...
