Threading
67
2022-05 EN 50400685.00A.04
Threading the Right Overlock Needle Thread RN/Green
The right needle thread path is marked green.
Prerequisite:
• Threading is prepared.
• The left needle thread is threaded.
> Pull the thread beneath the thread guide plate to the left and up through the center opening of the
thread deflection finger.
> Place the thread along the colored marking, then over the needle thread take-up cover and pull it
towards the needle.
> Insert the thread into the right thread guide on the machine.
> Hook the thread into the right thread guide at the needle holder.
> Thread the right overlock needle (RN).
> Place the thread beneath the presser foot to the back left.
To Next Page
Loading...
