Threading
70
2022-05 EN 50400685.00A.04
Threading the Right Coverstitch Needle Thread RC/Blue
The right coverstitch needle thread is marked in blue all along the thread path.
Prerequisite:
• «Threading is prepared».
> Pull the thread beneath the thread guide plate to the back left through the first opening of the thread
deflection finger.
> Place the thread along the colored marking, then over the needle thread take-up cover and pull it
towards the needle.
> Hook the thread into the third thread guide from left of the needle holder.
> Thread the needle eye.
> Place the thread beneath the presser foot to the back left.
> When all needed threads are threaded, lower the presser foot.
To Next Page
Loading...
