Setting Up the Machine
22
2022-05 EN 50400685.00A.04
3 Setting Up the Machine
3.1 Working Area
A stable table with a secure stand is a good prerequisite for optimal sewing results. Ergonomics around the
sewing table is important to protect the muscles and joints of the back, shoulder, arms and hands. The
recommendation for optimal ergonomics includes matching the table height with the body posture. Avoid
remaining in the same position for long periods.
The machine can also be operated when standing.
> Place the machine on a solid table.
Correct Sitting Position
With the arms bent (90°), the fingertips can touch the stitch plate in a comfortable sitting position.
3.2 Connection and Switching on
Connecting the Machine and Foot Control
> Insert the device plug (1) of the foot control/power cable into the connection for the foot control/power
cable.
> Insert the power plug (2) of the foot control/power cable into the socket.
Use of the Power Cable (only USA/Canada)
The machine has a polarized plug (one contact is wider than the other). To reduce the risk of electric shock,
the plug can only be plugged into the socket in one way. If the plug does not fit into the socket, turn the
plug. If it still does not fit, an electrician needs to be called to install an appropriate outlet. Do not modify the
plug in any way.
Switching the Machine and Sewing Light On/Off
> Set the power switch to «I».
– The machine and the sewing light are switched on.
> Set the power switch to «0».
– The machine and the sewing light are switched off, whereby the sewing light may still glow a little.
To Next Page
Loading...
