Setting Up the Machine
32
2022-05 EN 50400685.00A.04
• to activate the air threader pipes
• to change the presser foot
> To move the needle manually, turn the handwheel counter-clockwise until the desired needle position is
reached.
Threading the Needle Manually
With the needle threader every needle can be threaded easily.
> Hold the needle threader with the flat grip side facing up.
> Pull the thread horizontally through the slot and hold the end of the thread.
> Position the needle threader with the V-guide at the top of the needle and with little pressure slide along
the needle to the eye.
– The metal pin presses the thread through the eye of the needle.
> Release the pressure on the needlet threader and remove it from the needle.
– A thread loop is formed.
> Pull the thread loop with the end of the needle threader to the back.
> Place the thread under the presser foot to the back left.
To Next Page
Loading...
