Setting Up the Machine
29
2022-05 EN 50400685.00A.04
> Lower the presser foot lifter.
– The machine is ready for sewing.
– The thread tension is active.
Lifting the Presser Foot Up/Down with the Knee Lifter
Temporarily lifting the presser foot using the knee lifter allows to position the sewing project with both
hands.
Prerequisite:
• The knee lifter is attached.
> To raise the presser foot, press the knee lifter with the knee out to the right and hold it in place.
> To lower the raised presser foot, slowly release the pressure on the knee lifter.
> To lower the already engaged presser foot, press the knee lifter all the way to the right and release
slowly.
Changing the Presser Foot
Prerequisite:
• The needles are in the top position.
• The presser foot is raised.
> Press the release button on the rear side of the presser foot shaft.
– The presser foot is released.
To Next Page
Loading...
