Embroidering preparation
29
2019-02 EN 5020070.00A.04
> At the top of this movement pass the thread from right to left through the slotted eye of the take-up
lever and then downwards again.
> Guide the thread through the guides above the presser foot.
> Press the lever to the very bottom until it clicks in.
– The hook pin passes through the needle eye (9).
– To prevent the threader from being damaged, the presser foot is lowered automatically.
> Guide the thread around thread guide.
> Guide the thread in front of the needle and under the hook pin.
To Next Page
Loading...
