Bernette b77 - Attaching the Knee Lifter of the Free Hand System; Switching the Machine on

Sewing Preparation
24
2022-08 EN 5020077.40A.04
> Insert the plug of the cable into the foot control socket of the machine.
> Place the foot control under the table.
> If the cable is too long, roll up the excess length and fix it in the cable holders of the foot control.
Attaching the Knee Lifter of the Free Hand System
The presser foot may be raised and lowered with the Free Hand System. The knee lifter is extremely helpful
when sewing appliqué, patchwork and quilting since it allows you to handle the fabric while your knee
controls the presser foot.
> Insert the knee lifter into the opening at the front side of the machine.
> Adjust the sitting height so that the knee lifter can be operated with the knee.
Switching the Machine On
> Set the power switch to «I».