Bernette b77 - 6.18 Sewing Corners

Practical Stitches
77
2022-08 EN 5020077.40A.04
> Press the foot tip and the black knob, lower the presser foot and continue sewing.
– The black button releases automatically after sewing few stitches.
1
> To support the presser foot when manually guiding the fabric and sewing from the folded side, place
one, two or three small plates from the height compensating tool (1) behind the needle under the
presser foot.
1
1 Height Compensating Tool
6.18 Sewing Corners
> Stop the machine when the corner is reached.
> Pierce the needle into the fabric.
> Raise the presser foot.
> Use the needle as a pivot and turn the fabric.
> Lower the presser foot and continue sewing.