Sewing Preparation
25
2022-08 EN 5020077.40A.04
Fixing the Touch Screen Pen
> Store the touchscreen pen on the top holder.
Regulating the Speed via the Foot Control
Via the foot control the speed can be adjusted infinitely variable.
> Press the foot control down carefully to start the machine.
> To sew more quickly, press the foot control further down.
> Release the foot control to stop the machine.
Raising/Lowering the Needle
> Sink the heel back on the foot control to raise/lower the needle.
Programming the Foot Control Individually
The foot control can be programmed individually.
2.2 Spool Pin
Horizontal Spool Pin
Placing the Thread Spool and the Spool Cap
Spool caps hold the thread spool in place for proper release of thread from the spool.
> Place the thread spool on the spool pin.
To Next Page
Loading...
