Bernette b77 - 3 Setup Program; 3.1 Sewing Settings

Setup Program
43
2022-08 EN 5020077.40A.04
3 Setup Program
3.1 Sewing Settings
Adjusting the Upper Thread Tension
Changes to the upper thread tension in the Setup Program affect all of the stitch patterns. The setting in the
setup is retained after the machine is switched off.
> Tap «Setup Program».
> Tap «Sewing Settings».
> Tap «Adjusting the Upper Thread Tension».
> Adjust the upper thread tension.
Adjusting the Maximum Sewing Speed
The maximum speed can be reduced by this function.
> Tap «Setup Program».
> Tap «Sewing Settings».
RPM
> Tap «Maximum Sewing Speed».
> Set the maximum sewing speed.
Programming Securing Stitches
If the function is switched on, at the start of the pattern, 4 securing stitches are automatically sewn after the
thread cut.
> Tap «Setup Program».
> Tap «Sewing Settings».
> Switch «Securing Stitches at the Start of the Pattern» on or off.