Bernette b77 - 6.2 Sewing Straight Stitch; 6.3 Securing with the Automatic Securing Program

Practical Stitches
67
2022-08 EN 5020077.40A.04
6.2 Sewing Straight Stitch
Adjust the stitch length for the sewing project, e.g. a long stitch for denim (approx. 3–4mm) and a
short stitch for delicate fabric (approx. 2–2.5mm). Adjust the stitch length depending on the thread
thickness, e.g. a long stitch (approx. 3–5mm) for top-stitching with gimp.
Prerequisite:
• The Zigzag Foot (DA) is attached.
> Tap «Practical Stitches».
> Select Straight Stitch No.1.
6.3 Securing with the Automatic Securing Program
Due to a determined number of 6 stitches sewn forwards and 6 stitches sewn in reverse, the securing is
regular.
Prerequisite:
• The Zigzag Foot (DA) is attached.
> Tap «Practical Stitches».
> Select the Securing Program No.5.
> Press the foot control.
– The machine secures automatically.
> Sew the seam in the desired length.
> Push the button «Securing Stitches».
– The machine secures automatically and stops at the end of the securing program.