Errors and Faults
80
2022-08 EN 5020070.40A.04
Message on the Display Cause Repair
The upper thread is used up. > Insert a new thread spool.
> Rethread.
The upper thread has broken. > Rethread.
The bobbin thread is used up. > Remove the empty bobbin, wind it again and reinsert it.
The threader lever is not raised. > Raise the threader lever.
The USB stick is not connected. > Insert the USB stick (optional accessory) into the port.
Not enough free memory
available on the USB stick
(optional accessory).
> Delete data on the USB stick (optional accessory).
> Overwrite data on the USB stick.
The needle moves sideways. When the stitch plate is exchanged, this illustration appears
because the needle is likely to move.
The needle moves upwards. > Check whether there are any external objects near the
stitch plate.
> To raise the needle, tap «Confirm».
To Next Page
Loading...
