Errors and Faults
82
2022-08 EN 5020070.40A.04
Message on the Display Cause Repair
This message appears when the
thread cutter is adjusted after
embroidery starts.
> Cut the thread manually.
500,000 stitches have been sewn
with the machine since the last
cleaning advice.
> Clean the machine.
> For reference to cleaning to be made again after
switching on the machine, tap «Cancel».
The machine has reached a stitch
count of 4,000,000 since the last
maintenance by a bernette
dealer.
> Contact your specialized bernette dealer to have the
machine maintained.
> For reference to maintenance to be made again after
switching on the machine, tap «Cancel».
To Next Page
Loading...
