Bernina deco 330 - Adjusting Needle Drop Position

8
Deco 330
Adjusting Needle Drop Position
1Lower the Needle to its lowest position byturning
the handwheel.
2Removetheface cover and loosen Screw,
movetheNeedlebarsupporter to the right or
left until the needle comes to the center of the
Needle plate hole .
3TightentheScrew.
4Attachtheface cover.
1
Screw
2
Needle bar supporter
3
Needle
4Nedleplatehole
2
1
4
3
1
2
3
4
1
The needle should be positioned in the center of needle plate hole.
3