01/10 347 LB 444 K-40
3
The hardware and software of the LB 444 K-40 system makes it easy to adapt the
system to rather different measuring geometries and measuring tasks. Therefore, the
settings and parameters of the measuring instrument have to be defined with care for
the respective measuring task when taking the system into operation. Important
parameters may not be changed later, in order not to compromise the reliable operation
of the system. The system should be taken into operation and settings changed only by
persons who know how to work with the instrument. Therefore, all users should read
these operating instructions carefully. We recommend documenting all settings in a setup
protocol.
Before starting any work, please read this operating manual carefully!
To Next Page
Loading...
