EasyManua.ls Logo

Beta EVO 2T - Pre-Ride Checks and Breaking-In

Beta EVO 2T
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2
OPERATION
24
GB
CHECKS BEFORE AND AFTER USE
For safe driving and long vehicle life you should:
• Checkalluidlevels.
• Checkthecorrectoperationofthebrakesandbrakepadwear(page44).
• Checkpressure,generalconditionandthicknessoftread(page10).
•Checkthatthespokesareproperlytightened.
•Checkthechaintension(page55).
• Checktheadjustmentandtheoperationofallthecablecontrols.
• Inspectallthenutsandbolts.
•Withtheenginerunning,checktheoperationoftheheadlight,therearandbrake
lights, the indicators, the warning lights and the horn.
•Washthemotorcyclethoroughlyafteroff-roaduse(page59).
BREAKING IN
Thebreaking-inperiodlastsapproximately5hours,duringwhichitisadvisableto:
Avoid travelling at constant speed.
Avoid turning the throttle more than 3/4 of the way.
WARNING:
Aftertherst5hourstoreplacethegearboxoil.
This procedure should be followed each time piston, piston rings, cylinder, crankshaft or
crankshaft bearings are replaced.

Table of Contents

Other manuals for Beta EVO 2T

Related product manuals