Beta RR 125 LC User Manual

BALANCER GEARS
• Place an aluminum plate “b” between the bal-
ancer drive gear “3” and the balancer driven
gear “4”, and then tighten the primary drive
gear nut.
3. Bend the lock washer tab along a flat side of
the nut.
a
4
1
3
3
12
b
4

Beta RR 125 LC Specifications

General

Displacement	124.8 cc
Fuel System	Electronic Fuel Injection
Ignition	Electronic
Lubrication	Wet sump
Clutch	Wet multi-disc
Transmission	6-speed
Final Drive	Chain
Seat Height	920 mm
Fuel Tank Capacity	7.5 liters
Starting System	Electric
Front Suspension	Hydraulic fork with ø41 mm shaft
Front Brake	260 mm disc
Rear Brake	Single disc, 220 mm
Engine Type	Liquid-cooled, 4-stroke, single cylinder