Beta RR 350 User Manual

4
CHECKS AND MAINTENANCE
40
GB
REPLACEMENT
Keep the vehicle in vertical position relative
to the ground.
Replacement of the coolant must take place
when the engine is cold.
- Unscrew cap 1.
- Place a container under screw 2.
- Unscrew the screw 2.
- Drain the liquid.
- Tighten screw 2 applying the specifi c
washer.
- Unscrew drain screw 3.
- Proceed to fi lling.
- Reapply the loading cap and the bleed-
ing screw.
The amounts of liquid are shown on page
11.
Use the liquid indicated on page 14 in
the “Recommended lubricants and liquids”
table.
WARNING:
Never unscrew the fi ller cap of the radiator
when the engine is hot. Danger of burning!
1
2
3

Beta RR 350 Specifications

General

Bore x Stroke	88 mm x 57.4 mm
Ignition	DC-CDI
Lubrication	Wet sump
Transmission	6-speed
Clutch	Wet multi-disc
Front Brake	260 mm disc
Rear Brake	240 mm disc
Front Tire	90/90-21
Rear Tire	140/80-18
Seat Height	940 mm
Ground Clearance	320 mm
Dry Weight	107 kg
Rear Suspension	Sachs shock absorber
Fuel Capacity	9.5 liters