Name: Beta RR 350
Brand: Beta
Rating: 5 (1 reviews)

To Next Page

To Previous Page

CHECKS AND MAINTENANCE

Compress and release the fork 3-4 times.

Tighten the wheel bolt and the screws of

the foot-leg.

WARNING:

Tightening of the screws should be carried

out by adjusting the torque wrench to the

stability torque with repeated tightening

until stability torque has been achieved.

10Nm

50Nm

TYRES

Only ﬁ t tyres approved by BETAMOTOR.

Unsuitable tyres can adversely affect the road holding of the vehicle.

• To protect your safety, immediately replace any damaged tyres.

• Slick tyres adversely affect the road holding of the vehicle, especially on wet roads

and in off-road riding.

• Insufﬁ cient pressure results in abnormal wear and overheating of the tyres.

• The front and rear tyres must have the same tread design.

• Always measure the inﬂ ating pressures when the tyres are cold.

• Keep the tyre pressures within the prescribed range.

Questions and Answers:

Need help?

Do you have a question about the Beta RR 350 and is the answer not in the manual?

Beta RR 350 Specifications

General