30
SET DATE
Factory set for factory local Date, the Date can be set to values between 01.01 2006 and 01.01
2049. If Units are set for Metric, Day appears to the left of Month. If Units are set for Imperial,
Month appears to the left of Day.
• After having set and accepted the Time of Day, the Date (Day, Month, Year) appears with the
graphic YR, and Year value flashing (Fig. 29).
> Press/release the S (Select/Right) button to advance the Year setting in increments of 1 Year,
or press/hold the button to scroll through the settings at a rate of 4 per second.
> Press/release the A (Advance/Left) button to accept the setting. The graphic MtH appears and
the Month value flashes.
> Press/release the S (Select/Right) button to advance the Month setting in increments of 1
Month, or press/hold the button to scroll through the settings at a rate of 4 per second.
> Press/release the A (Advance/Left) button to accept the setting. The graphic dAY appears and
the Day value flashes.
> Press/release the S (Select/Right) button to advance the Day set-
ting in increments of 1 Day, or press/hold the button to scroll
through the settings at a rate of 4 per second.
> Press/release the A (Advance/Left) button to accept the setting
and advance to Set NORM PC Sampling Rate, or press/hold Both
buttons for 2 seconds to revert to the SET 2 screen.
• Operation reverts to NORM SURF MAIN in 2 minutes if no but-
ton is pressed.
Fig. 29 -SET DATE
To Next Page
Loading...
Need help?
General
