Beuchat d.i.P User Manual

32
SET AUDIBLE ALARM
Factory set for ON, the Alarm can also be set to OFF.
When set OFF, the Alarm will not sound during the conditions de-
scribed on page 9.
To access the Set Audible Alarm screen while viewing the SET 2
screen, press/release the A (Advance/Left) button 9 times (< 2 sec-
onds each time).
• The graphic ALM and Alarm icon A appear with the setting
flashing (Fig. 32).
> Press/release the S (Select/Right) button to toggle between ON
and OFF.
> Press/release the A (Advance/Left) button to accept the setting
and advance to Set Wet Activation, or press and hold Both but-
tons for 2 seconds to revert to the SET 2 screen.
• Operation reverts to NORM SURF MAIN in 2 minutes if no
button is pressed.
SET WET ACTIVATION
Factory set ON, this feature can also be set OFF (disabled). When
set ON, the d.i.P will automatically Activate and enter NORM
Dive Mode upon descent to 1,5 M (5 FT), or NAV Dive Mode
upon descent to 0,6 M (2 FT).
Fig. 32 - SET AUDIBLE ALARM

Beuchat d.i.P Specifications

General

Brand	Beuchat
Model	d.i.P
Category	Diving Instrument
Language	English