38
CHRONO START/STOP/RESET Display, (Fig. 38)
• Graphics CHR and ON (if running) or OFF (if stopped)
• Chrono Time
• Clock icon
> Press/release the S (Select/Right) button (< 2 seconds) to Stop
or Start the Chrono.
> Press the S (Select/Right) button for 2 seconds to Reset the
Chrono to :00:00 (:min:sec) if Stopped first.
> Press/release the A (Advance/Left) button (< 2 seconds) to view
the NORM DIVE ALT 1 Display.
> The display will revert to the NORM DIVE MAIN screen after
30 seconds, unless S is pressed to Start, Stop, or Reset the
Chrono, or A is pressed to view ALT 1.
NORM DIVE ALT 1 Display, (Fig. 39)
• Current Depth with M (or FT) icon
• Temperature with degrees icon and graphic C (or F)
• Time of Day (hr:min) with h icon
• EDT (Elapsed Dive Time) (hr:min:sec)
• Ascent Rate Bar Graph, if ascending
> If a Nitrox dive, press/release the A (Advance/Left) button to
view the NORM DIVE ALT 2 Display.
> The display will revert to the NORM DIVE MAIN screen after
3 seconds, unless A is pressed to view ALT 2.
Fig. 39 - NORM DIVE ALT 1
Fig. 38 - CHRONO START/STOP
To Next Page
Loading...
Need help?
General
