Index
1. GENERAL 1-5
1.1 Declaration of conformity 1-5
1.2 Foreword 1-6
1.3 Symbols 1-8
1.4 Documentation 1-9
1.5 Description of the terminal 1-9
1.6 Technical characteristics of the terminal 1-10
1.7 Dimensions and weight of the terminal 1-11
1.8 Obtaining technical assistance 1-13
1.9 Replacement parts list 1-14
1.10 Warranty 1-14
2. SAFETY INSTRUCTIONS 1-15
2.1 Prohibited uses 1-15
2.2 Regulations 1-15
2.3 Prescriptions of use 1-15
3. DELIVERY AND INSTALLATION 1-17
3.1 Connection of the terminal to the electrical supply line 1-18
3.2 Connection of the terminal to the platform scale 1-19
3.2.1 Equipotentiality between the terminal and the platform scale 1-20
3.2.2 Connection of analogue load cells 1-20
3.2.3 Connection of digital load cells 1-21
3.3 COM1 serial port connection 1-22
3.4 COM2 serial port connection 1-23
3.4.1 Connection of COM2 in RS232 configuration 1-23
3.4.2 Connection of COM2 in RS422 configuration 1-24
3.4.3 Connection of COM2 in RS485 configuration 1-25
3.5 Analogue output connection 1-26
3.6 Input/Output connection 1-27
4. CONTROLS, DISPLAY, SWITCHING THE TERMINAL ON AND OFF 1-29
4.1 Display of weight and additional information 1-29
4.1.1 Selection display symbols 1-30
4.2 Weighing function keys 1-31
4.3 Alphanumeric keys 1-33
4.4 Switching the terminal on and off 1-34
5. USE OF THE TERMINAL 1-37
5.1 General 1-37
5.1.1 Using the keys to navigate the menus 1-37
5.1.2 Entering numeric data (Editor) 1-38
5.1.3 Entering alphanumeric data 1-38
5.1.4 Shortcut keys 1-40
5.2 User menu 1-40
5.2.1 User menu tree 1-40
5.2.2 Adjusting the contrast 1-42
5.2.3 Changing the date and time 1-42
5.2.4 Weight display 1-42
5.2.5 Memory status 1-45
5.2.6 Reprint 1-45
D410
1-3
To Next Page
Loading...