5.2.7 Diagnostics (for digital scale only) 1-45
5.2.8 Setting the outputs as Setpoints (if enabled) 1-46
5.2.9 Setting the outputs as ranges (if enabled) 1-46
5.2.10 Generic code 1-46
5.2.11 Product code 1-47
5.2.12 Product code list 1-47
5.2.13 Preset tares 1-48
5.2.14 Preset tare list 1-48
5.2.15 Progressive number 1-49
5.2.16 Coefficient Management 1-49
5.2.17 Totals management 1-50
5.3 Printing weighing data 1-52
5.3.1 Weighing data reprint 1-53
5.4 Operating modes 1-54
5.4.1 Standard operation 1-54
5.4.2 Sum weighing operation 1-54
5.4.3 Loading extraction operation 1-54
5.4.4 Unloading extraction operation 1-55
5.5 MPP operation 1-55
6. OPTIONS 1-57
6.1 4 I/O board 1-60
6.2 BCD parallel 5V 1-61
6.3 Calculator BCD 1-63
6.4 Parallel 24V source current BCD (positive common) 1-65
6.5 Serial port expansion board 1-68
6.6 MPP memory expansion boards 1-71
6.6.1 Memory capacity 1-71
6.6.2 Operation 1-71
6.6.3 Disabling MPP 1-72
6.6.4 Checking memorised weight data 1-73
6.7 12-24Vac-dc input power supplier 1-74
6.8 Printers 1-76
7. MAINTENANCE 1-77
7.1 Battery 1-77
7.2 Changing the fuses 1-77
8. TROUBLESHOOTING 1-79
8.1 Malfunctions 1-79
8.2 Error messages 1-80
D410
1-4
To Next Page
Loading...