MK / MKT (E5) 03/2019 page 126/158
24.6 Equipment and options (extract)
To operate the alternating climate chamber, use only original BINDER accessories or accesso-
ries / components from third-party suppliers authorized by BINDER. The user is responsible for
any risk arising from using unauthorized accessories.
Microprocessor display program controller
Door with heated window and interior lighting
Programmable anti-condensation protection of charging material
Environmentally friendly refrigerant R452A (MK / MKT) and R23 (MKT)
Safety controller (temperature safety device class 2 acc. to DIN 12880:2007)
MK/MKT 115, 240, 720: Internal socket 230 V AC, 1N ~ 50-60 Hz, max. load 500W, protection type IP 54
MKT: 2 zero-voltage relay outputs, addressable via operation lines
Ethernet interface for computer communication
1 access port with silicone plug, diameter 50 mm / 1.97 in left (MK / MKT 115, 240),
2 access ports with silicone plug, diameter 80 mm / 3.18 in left and right (MK / MKT 720)
Four castors (2 lockable)
Additional rack, stainless steel
Perforated rack, stainless steel
Reinforced rack with 1 set of rack lockings
Securing elements for additional fastening of racks (4 pieces)
Access ports 30mm, 50mm, 80mm, 100mm, 125mm, left or right, with silicone plug
Over-/under temperature safety device class 2
Analogue outputs 4-20 mA for temperature actual value and set-point value to 6 pole DIN connection
socket, DIN plug included
Object temperature display with flexible Pt100 temperature sensor
Water cooling (option for MK 56, for other chambers available via BINDER Individual Customized Solu-
tions)
Notch-type access port 35 x 100 mm in the door
BINDER Data Logger kit for temperature TH 220
MK: 4 zero-voltage switching outputs, addressable via operation lines
MKT: 2 zero-voltage relay outputs, addressable via operation lines
Calibration of temperature including certificate
Spatial temperature measurement including certificate
Spatial temperature measurement acc. to DIN 12880 including certificate