Binder MK 56 - Word Message Panel Structure; Localization; Position of Safety Labels on the Chamber

MK / MKT (E5) 03/2019 page 8/158
Prohibition signs
Do NOT touch Do NOT spray with
water
Do NOT climb
Information to be observed in order to ensure optimum function of the product.
1.2.4 Word message panel structure
Type / cause of hazard.
Possible consequences.
∅ Instruction how to avoid the hazard: prohibition.
 Instruction how to avoid the hazard: mandatory action.
Observe all other notes and information not necessarily emphasized in the same way, in order to avoid
disruptions that could result in direct or indirect injury or property damage.
1.3 Localization / position of safety labels on the chamber
The following labels are located on the chamber:
Pictograms (Warning signs)
Hot surface (on chamber door)
Cold surface (on chamber door)
Electrical hazard
(chamber with voltage and fre-
quency changer: on the voltage
and frequency changer)
Service label
Figure 1: Position of labels on the chamber
Keep safety labels complete and legible.
Replace safety labels that are no longer legible. Contact BINDER service for these replacements.